Elation ELED STRIP RGBW Manual de usuario

DLED STRIP RGBAWElation Professional™6122 S. Eastern Ave.Los Angeles, Ca 90040www.elationlighting.com Rev. 01/18/2011 – visage Version 1.0

5. FIXTURE OVERVIEW 1. LED Display – 4-segment menu display. Used to display the DMX address as well as all other menu functions.2. Mode/Esc Button

7. 3-Pin DMX Output Jack – This jack is used to send an incoming DMX signal to the next fixture in the DMX chain via a female, 3-pin XLR jack.8. 3-PIN

6. MOUNTING AND INSTALLATIONCautions:For added protection mount the fixtures in areas outside walking paths, seating areas, and away from areas were

DLED STRIP RGBAW ™©Elation Professional, Los Angeles Ca. 13 www.ElationLighting.com

Mounting The DLED STRIP RGBAW™ is fully operational in any mounting position, hanging upside-down, side mounted, or set on a flat level surface, et

Clamp MountingThe DLED STRIP RGBAW™ provides a unique mounting bracket assembly that allows the unit to stand on a flat surface or to be hung on trus

7. UNDERSTANDING DMXDMX-512: DMX is short for Digital Multiplex. This is a universal protocol used by most lighting and controller manuf

male and female XLR connector on either end of the cable. Also, remember that a DMX line must be daisy chained and cannot be split, unless using an a

DMX-512 control connectionConnect an XLR cable to the female XLR output of your controller and the other side to the male XLR input of the fixture (P

resistor that is connected between pins 2 and 3 of a male XLR connector (DATA + and DATA -). This fixture is inserted in the female XLR

DLED STRIP RGBAW ™©Elation Professional, Los Angeles Ca. 2 www.ElationLighting.com

setting the correct DMX address on the digital display located on the back of the fixture.You can set the same starting address for all fixtures or a

DLED STRIP RGBAW ™©Elation Professional, Los Angeles Ca. 21 www.ElationLighting.com

8. DISPLAY LED INDICATOR. The DLED STRIP RGBAW ™ has a LED indicator on the display. This indicator is designed to give a quick visual indication of t

9. DISPLAY MENU Default settings shaded.MODE<ADDR>VALUA001~AXXX (AXXX)DMX address settingMODE<ADDR>SLAVON/OFFSet as SlaveMODE<ADDR>

<SC01>~<SC48>FADEXXXEdit the internal scenes<SC01>~<SC48>TIMEXXX.X(000.1S~999.9S)Edit the internal scenes<SC01>~<SC48

see Section 10/Page 28 of this manual “Remote DMX addressing.” 9.1.2 <RUN> - Internal Program SettingsThis function allows the internal progr

activated, the keys will be automatically locked in 15 seconds from the last press. In order to deactivate the keylock status, press the Mode/Esc-but

<FANS> Select the fan run modeThis function will choose between the fan settings of Auto, High, or Low. The default setting is Auto.<POHO>

access code is “038”<CLFE> Clear Fixture Run TimeThis function resets the run time to zero. .5 “Edit” Internal Program Settings: The fixture co

selected scene, press ENTER. You can change the channel number by tapping the UP button.5. The display will show the DMX value for the channel that

TABLE OF CONTENTS 1. General Information……………………………………………………………………… 3a. Introduction………………………………………………………………………. 3b. Unpacking………………………………………………………..…

7. Press UP, the display will read "ON".8. Press MODE/ESC, the display shows "SC02". You successfully downloaded the first s

10. DMX ADDRESSINGSetting the DMX address - After the fixture is turned “ON” it will immediately complete a reset process that test all the fixture’s

6. Press ENTER to confirm.7. Press MODE/ESC to return to the main menu. Controller Settings:1. Set the DMX value of channel 1 to a value of 7.2. Set t

11. DMX TRAITS DMX Operation Notes: The fixture will function in DMX mode whenever the unit is receiving a DMX signal. Please note that this will ove

DMX channel’s functions and their values (5-Channel Mode): DMX channel’s functions and their values (5-Channel Mode): Channel 1 - Red:Channel 1 - Re

DMX channel’s functions and their values (6-Channel Mode): DMX channel’s functions and their values (6-Channel Mode): Channel 1 - Red:Channel 1 - Red:

channels 6~9 will control special features. 9-Channel Mode: The charts below and on the next page detail the DMX channel layout for 9-channel assign

71-100internal program 3101-130internal program 4131-160internal program 5161-190internal program 6191-220internal program 7221-255internal program 8C

DMX channel’s functions and their values (25-Channel Mode): DMX channel’s functions and their values (25-Channel Mode): Channel 1 - Red LED:Channel 1

0-255White (0-Black, 255-100% White)  Channel 10 - Amber LED:Channel 10 - Amber LED:0-255Amber (0-Black, 255-100% Amber)Channel 11 - Red LED:Channel 1

1. GENERAL INFORMATIONINTRODUCTION: Congratulations, you have just purchased one of the most innovative and reliable LED fixtures on the market today!

0-255Green (0-Black, 255-100% Green)  Channel 23 - Blue LED:Channel 23 - Blue LED:0-255Blue (0-Black, 255-100% Blue)  Channel 24 - White LED:Channel 2

Channel 5 - Amber LED:Channel 5 - Amber LED:0-255Amber (0-Black, 255-100% Amber)Channel 6 - Red LED:Channel 6 - Red LED:0-255Red (0-Black, 255-100% Re

  Channel 18 - Blue LED:Channel 18 - Blue LED:0-255Blue (0-Black, 255-100% Blue)  Channel 19 - White LED:Channel 19 - White LED:0-255White (0-Black, 2

Channel 27 - Shutter, strobe:Channel 27 - Shutter, strobe:0-31No function (shutter close)32-63No function (shutter open)64-95Strobe effect slow to f

12. WORKING WITH BUILT-IN PROGRAMSThe fixture comes equipped with a built-in DMX recorder that allows custom programs to be installed and recalled di

3. Tap the “ENTER” button to define the maximum amount of steps. Maximum amount of steps is 48. Steps will be indicated as “S-01” for a s

Step 3 – Playing a ProgramTo initiate a program follow the procedure below: • Access the main menu and use the “Up” and “Down” to toggle to “Mod

13. User manual of RF controller BLACK OUT ：The lamp will be turned off after press the button and exit to the status of Address Display. AUTO RUN：

B：Blue color adjustment button. Press this button to the full brightness of blue color and enter the status of adjustment.,.Press number+ENTE

14. LENS REPLACEMENTThe DLED STRIP RGBAW comes with a removable front cover that allows the lens assembly to be changed out to achieve different beam

operate this fixture with the lens cover removed.Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourse

15. CLEANING AND MAINTENANCEConsider the following points during normal service and inspection:1. Be sure all screws and fasteners are securely t

16. 2-YEAR LIMITED WARRANTYA. Elation Professional® hereby warrants, to the original purchaser, Elation Professional® products to be free of ma

products covered by this warranty were manufactured after January 1, 1990, and bare identifying marks to that effect. E. Elation Profes

17. PHOTOMETRIC DATA DLED STRIP RGBAW ™©Elation Professional, Los Angeles Ca. 53 www.ElationLighting.com

18. DIMENSIONAL DRAWINGS DLED STRIP RGBAW ™©Elation Professional, Los Angeles Ca. 54 www.ElationLighting.com

19. CIRCUIT SCHEMATICDLED STRIP RGBAW ™©Elation Professional, Los Angeles Ca. 55 www.ElationLighting.com

DLED STRIP RGBAW ™©Elation Professional, Los Angeles Ca. 56 www.ElationLighting.com

20. TECHNICAL SPECIFICATIONSPower supply: AC 100V-240V~, 50Hz/60Hz Power consumption: Maximum 100W LED Configuration: 7

DLED STRIP RGBAW ™©Elation Professional, Los Angeles Ca. 58 www.ElationLighting.com

DLED STRIP RGBAW ™©Elation Professional, Los Angeles Ca. 59 www.ElationLighting.com

2. SAFETY INSTRUCTIONS To guarantee proper and consistent operation, it is important to follow the guidelines in this manual. Elation Profes

Elation Professional6122 S. Eastern Ave.Los Angeles, CA. 90040323-582-3322 / 323-832-9142 fax www.ElationLighting.com / Info@ElationLighting.

damaged, replace it immediately with a new one of similar power rating.12.Always disconnect from main power before performing any type of service

3. FEATURES• Low power consumption• Minimal heat emission• Maintenance free operation• Equipped with 75 1-Watt (15 x red, 15 x green, 15 x blue,

4. GENERAL GUIDELINESThis fixture is a professional lighting effect designed for use on stage, in nightclubs, in theatres, and other